PCB Cutting Machine Manual for Aluminum Substrate Separator V-groove Separator Routing Machine HXT-750 SMT Cutter Machine For SMT Assembling Line Production
Standard Equipment Introduction
Features:
1. The HXT-750 splitting machine adopts six sets of cutters to cut step by step to minimize the shear stress, and is equipped with a deformation control device. The edge of the divided substrate is smooth and smooth, and the board surface is very flat, neither twisted nor warped, with a tolerance of 0.6mm The left and right ultra-thin aluminum substrates can still perfectly control their deformation in the two wires, which meets the strict requirements of the glass tube process on the degree of deformation.
2. Due to multiple cuts, the cutting process is very stable, which greatly improves the positioning ability of the V-CUT groove. Even if the V-CUT groove is very shallow on the circuit board, the V-CUT groove will not jump out of the guide knife. Circumstances to avoid defective products.
3. All cutting blades are calibrated with a laser dual-frequency laser interferometer to ensure that the back knife can accurately continue cutting in the groove cut by the front knife. The runout of the knife tip is not more than 0.02mm to ensure perfect cutting quality.
4. A stainless steel platform with laser scale positioning function can be added (1.2m or 2.4m optional).
Product Specification
| Machine Specifications: | 490mm x 400mm x 350mm |
| Plus platform size: | 1200*450*350 / 2400*450*350 |
| Maximum sub-board length: | Unlimited |
| Splitting speed: | 80, 120, 200, 400mm/sec |
| Power: | 60W |
| Tool material: | SKD61 high speed steel |
| Board thickness: | 0.2-5mm |
| Machine weight: | 1.2M—41KG; 2.4M—50KG |
| Power supply: | 230V/50Hz (110V/60Hz) |
Product details
HXT-750 Application:
The 750 splitting machine uses six sets of cutters to cut step by step to minimize the shear stress, and is equipped with a deformation control device. The edge of the divided substrate is smooth and smooth, and the surface of the board is very flat, neither twisted nor warped, with a tolerance of 0.6mm The slitting of the left and right ultra-thin aluminum substrates can still perfectly control the deformation in the two wires, which meets the strict requirements of the glass tube process on the degree of deformation. Due to multiple cuts, the cutting process is very stable, which greatly improves the positioning ability of the V-CUT groove. Even if the V-CUT groove is very shallow on the circuit board, the V-CUT groove will not jump out of the guide knife. avoid bad.
a. Mainly used in electronics, electrical appliances, lighting, medical, new energy vehicles, automobiles and other electronic technology industries.
Applications:
Widely used in electronics manufacturing, consumer electronics, automobile electronics, communications equipment, aerospace, medical equipment, LED lamps, computers and peripherals, smart home, smart logistics, miniature and high power ratio electronic devices.
Product Tags:
|
|
V Groove PCB Cutting Machine Manual PCB Board Cutter High Speed Images
|
